Cheaper Gas & Electricity Bills

March 19, 2010

Dave’s Ultimate Automotive Gas Saving Tips

Filed under: Cheaper Utility bills — Tags: , , , , — admin @ 12:35 pm

The number one key to great gas efficiency is proper car maintenance. From tires to batteries, transmission fluids to air filters, every part of your vehicle play a vital role in how much gas you use. By taking a little time, and perhaps a little money, for the inspection and maintenance of your car, truck, or SUV, you can save as much as 50% on your gasoline expenses!

A good way to make sure that you have checked everything is to start at the front of the vehicle and work your way back. Some areas may need to be checked by an automotive service in Austin, while others may be easy to check on your own. You may wish to enlist the help of a friend, relative, or older child to help you as well.

Some of these vehicle maintenance may seem too minor to make any noticeable changes in your gas bill. However, as the old saying goes, every little bit counts! Together, these minor differences add up to big savings!

Beginning with the exterior lighting, be sure that all headlights and blinkers are working properly. This may not seem like a way to save gas, but if you have to slam on your breaks because someone did not see you, you will lose gas efficiency.

Next, inspect the body of the vehicle. Is there anything hanging down or busted off that could cause wind drag? If so, it is wise to replace the part through a reputable dealer.

Check your tires! Sometimes it is difficult to see the true condition of your tires when the car is on the ground. If you are able to jack it up to do so, great! If not, a tire center in Austin can inspect your tires, sometimes for free! If it appears that your tires need to be replaced, there are a number of discount tire centers in Austin. Make sure that your tires are properly inflated, and that they are the right size for your make and model of vehicle. Make sure that the lug nuts are tight all the way around as well!

Continue through the vehicle checking for a filled transmission and radiator, good plugs and wires, a good working battery, and good oil. You may consider getting an oil change in Austin if the oil looks dark. Check your tailpipe for any residue. If any is present, your vehicle may be using oil and is in need of maintenance!  For all of your car care needs in Austin, come visit http://davesultimateautomotivee.com

 

 

March 2, 2010

Home Energy Saving Tips to Cut Your Energy Bills

Filed under: Cheaper Utility bills — Tags: , , , , — admin @ 11:43 am

The easiest way to keep the lid on your home energy costs is to take a more proactive approach to how you and your family use energy around the house. Just by examining the infrastructure of your home and honestly evaluating your energy usage habits you will be able to identify several ways to cut your power bills.

For example, use electrical appliances at more cost-efficient times such as putting the washing machine on a timer and running it in the early hours. That will help keep power bills under control and in the process reduce the carbon emission burden on the planet.

You could even reduce your electricity and gas consumption by plugging the gaps where energy escapes through the roof, walls, doors and windows. Further tips on energy saving that cost nothing or very little include the following:

Close your curtains at dusk – this helps reduce heat escaping through the windows; Fit draught excluders on doors and windows, or just exclude draughts by using blankets; Turn down your thermostat. Even a 1°C reduction could cut your energy bills by 10 per cent; equating to an average saving of £55 per year; Set your water cylinder thermostat at 60°C (140°F); any higher and you will be wasting energy; When you leave a room turn out the lights and the TV. Indeed, don’t leave any appliances on standby as they still consume electricity; In winter when airing the house don’t open the windows then turn up the heating to compensate – it will simply escape straight into the atmosphere and your gas bill will go through the roof!

In addition to changing your habits, make sure that your home is energy efficient by checking that you are adequately insulated. Almost 50% of the heat supplied to the home will escape through the roof and walls. Your loft should be insulated up to a depth of 270mm and according to the Energy Saving Trust will, on average, reduce your power bills by around £150 per year.

One area where costs can be considerably trimmed in the long term is by installing a new gas boiler. Savings per year for a new A-rated boiler are estimated by the Energy Savings Trust to be in the region of £235 per year.

These tips are just the start. There are many other things that can be done to cut power consumption, around the home, but the main rule is always think about how you use energy and ask whether you can do it in a more energy efficient manner.

February 13, 2010

Saving Money On Your Utility Bills, Conservation And Consumption Reduction – A Zero Utility Cost Home, Part I

Filed under: Cheaper Utility bills — Tags: , , , , , , , , , , — admin @ 6:33 pm

“Our Utility Costs are too high!”

That’s what I said back in 2005, when I took a hard look at our finances and knew something had to change if we were to save any money that year.  We had lived in our home for 4 years, and it was new when we purchased it, so I originally thought that it was surely very energy efficient.  Well that was partly true, but we weren’t that energy efficient.  And it wasn’t long until I found out that plenty could still be done to save on our electricity costs, and our heating and air conditioning costs too.  We set out to save 10% and exceeded that target.

If you are like me, when you walk through the door after work, you want to spend some time with family, have dinner, perhaps relax a bit and settle into whatever evening routines you normally do with your kids, significant other or pets.  Energy conservation and consumption planning isn’t foremost on your mind when you arrive home.  But bills do tend to cross our minds at least once or twice a month.  Especially when there is too much month left at the end of the money!

I had spent very little time thinking about how much we actually spent on utility bills.  Then one Winter Saturday, after our dog Runner had just finished running around the house with his favorite toy, I saw him lie down in the sun coming in through a window.  I knew both he and our cats always would pick the same places around the house at various times to nap in the sun, depending on the time of day.  I began wondering just how much heat came in through the windows.  As a Physicist, I thought, “well I should be able to figure that out”.  After a little time spent with some books open, and a little more time on the Internet, I figured out it was about 800 watts for any south-facing window!  Now that’s a large amount of heat, and we had six windows facing south in our house.

After that realization my mind began to churn through the implications of this revelation.  We had at least a 4800 watt heating unit that was free on sunny days and was running all year.  But we weren’t always taking advantage of it by opening the blinds on nice sunny winter days.  To make matters worse, I realized that during the summer, these large “window-solar-heaters” would be heating the house while we were spending money on air conditioning trying to cool the house!

Now that I had the beginnings of an idea, and some hope that I could do something about my heating and air-conditioning costs, I began spending some serious time thinking about how far I could go towards reducing my utility costs.  I did a complete and thorough accounting of just how much energy we were using in the winter months to heat the house, and in the summer months to cool the house.  I accounted for every appliance in and around the house that used electricity too.

After accounting for how much we consumed, I realized that not only had our consumption or usage steadily increased, but the cost for electricity in NJ had also  increased, and also the costs for natural gas.  To add insult to injury, the “fees in the fine print” had also gone up too!  So now I was really motivated to do something. But what to do and where to begin?

I knew from basic physics that energy cannot be created or destroyed except in rare instances.  So tracking the energy we were paying for was a key place to start.  I reviewed our prior 12 months of natural gas bills and electricity bills.  I knew I could not do anything about the increase in utility costs for the most part.  But I could take a look at our usage from previous years and see how much more energy we were using.  After doing that I found that we had had an increase in energy consumption of roughly 20% over a few years.  I also analyzed the consumption information, looked at all our appliances both gas and electric, and created a seasonal model of energy use for our home.  The seasonal use model of electricity told me that we didn’t use much during the winter, and our biggest energy consumption was natural gas for heating the house.

So the first question I had was then why had our electricity and natural gas consumption increased?  My second question was where could I gain some savings in both heat loss during the winter and heat intrusion during the summer months.  After that I would tackle the electricity consumption.

Step 1 – where we were losing heat

Since it was already winter, it was relatively easy to simply walk around the house looking for cold air intruding.  I found a smorgasbord of places around the house that were quite cold to the touch.

The list of cold areas I found included:

sliding glass doors, with rubber seals that leaked in cold air
the basement door to the garage, which needed better seals
a garage door, with torn rubber seals at the bottom and sides
high-hat lights in upper floor ceilings, which were very cold
a front door, having bottom seals that had cracks in them
hot water pipes, which were not insulated in the basement
a couple of windows, which no longer shut completely
the attic stairs trap door, which had cold air streaming out of it.
the clothes dryer, in particular the vent to the outside which had a missing spring on the trap door outside
the fireplace glass doors, which looked nice, but were clearly cold from air leaks in the flue and the doors themselves

Most of these areas needed better sealing and insulation around them or adjustment and alignment of mating surfaces.  The sealing and insulation did not cost all that much, and I left the list of affected areas out so that I could check on them each fall as winter approached.  I also spent some time in the attic, seeking out areas that felt “warm” to the touch.  These were areas where heat from the rooms below was leaking into the attic.  Re-seating the attic insulation in most cases solved the problem, but there were a few areas where further efforts in sealing were required.

Step 2 – letting nature help

Watching the pets during a sunny winter day was also great help.  Our two cats would nap in the sun and stay in an area as long as it was warm.  I watched them move around the house over the course of the winter’s weekend, and you could see where the sun would warm the floor and which shades needed to be opened during winter days.  I also noticed that they would sleep on the darker rugs after the sun had already moved away, indicating they were still warm.  This was simple to understand, dark objects heated in the sunlight would retain more heat and re-radiate it back into the house even after the sunshine had moved on to another part of the house.  This type of heating is called Passive Solar Heating.  So where I could agreement from the rest of the family, a dark rug was used in a few key areas for winter.  In home designs, people often place natural stone or slate floors in these areas, which become a large thermal mass to absorb the sun’s rays.

We determined as a family to look at the forecast each day and fully open the blinds on the south facing windows for fall winter and spring, except on the most dreary days.

Step 3 – consume less heat

Since we used the most natural gas in the winter, the two places that burned more of it were the home heating units, and the dryer.  We decided to tackle the home heating right away, as our seasonal consumption model indicated that was clearly the largest energy consumption.  After some interviewing of all who lived in the house, and using some Voice of the Customer (VOC) techniques, it was determined that the upstairs bedrooms spaces really only needed to be warm when we woke up, and could be left cool throughout most of the day except for weekends.  On weekends, the heat could be turned on later in the morning when family members where not generally rushing off to work or school.

We made some adjustments to the setback thermostat programs in the upstairs and downstairs zones.  We adjusted  the times to heat each zone to fewer hours each workday, and we lowered the temperatures during the non-occupied hours as well.  We targeted a 30% reduction in the number of hours the temperature was actually set to the warmer value.  We also dropped the non-occupied temperature down to 61 Fahrenheit.

Step 4 – go further with alternative energy

We knew that saving and conserving was only half of the plan to lowering our heating costs.  Using less fossil fuel would be nice as a next step.  Since wood is plentiful in our area, and the cost per face cord was only $155, we next investigated replacing our fireplace with a wood burning stove.  Needless to say, it made perfect sense, as firewood is a renewable resource and it was not going up at the rates that natural gas was projected to increase.  Although it’s outside the scope of this article, write to me if you want the details on how this reduced our heating bills by an even greater amount than our conservation efforts!

Next up, the electric bill!

We felt that we had made some real progress with our heating bills, but larger still were the electricity costs, especially during the warmer summer months when the air conditioning units were running most often.  We followed the same general approach, first accounting in detail for how much electricity we were consuming over the prior 12 months.  Once again we listed how much energy we consumed and determined that over the 4 years we had lived there, that our energy consumption had increased.  More disturbing than the consumption increase was the upward trend in electricity rates.

Step 1 – where we were using/wasting electricity

Now with electricity, consumption spots were a little easier to find.  We went around the house, and I noted the amperage listing on each large item that was plugged into a wall outlet or wired directly to the house current.  To make a fair comparison, I also made note of the frequency of use or the likely average hours “on” in a typical summer month.  In engineering terms these usage times are called “duty cycles”.  When I was finished, I had a list of the consumption sources to manage or improve that looked like this:

Air conditioning – 100 kwh daily
Well Pump & Filtration – 19 kwh daily
Refrigerator 1 – 7 kwh daily
Refrigerator 2 – 5 kwh daily
Dishwasher – 3.6 kwh daily
Washing Machine – 0.5 kwh daily
Electric Oven –
Microwave Oven –
Hot Tub – 3 kwh daily
Pond Pump – 2 kwh daily
Light Bulbs & fans – 2 kwh daily

These totaled to just over 140 kwh daily during the summer months.

A good source of information to help with these calculations can be found at:

http://michaelbluejay.com/electricity

Clearly the air conditioning and well pump were the largest contributors, but opportunities existed in other areas too.  Looking at the consumption costs, it seemed that cold air and clean water were two very expensive commodities in our home! So I went around the house identifying once again any places where these two might be wasted.

Step 2 – letting nature help

For all the south facing windows, we found a set of cloth backed horizontal blinds that had a white reflective outer layer facing the window, and a dark inner layer.  These were custom and cost about $300.  We then agreed as a family to keep them closed throughout the summer months.  We also kept the doors closed to the room that had the most south facing windows, as it was the largest room in the house.  While it got slightly warmer in that room, we weren’t spending much time there during the day and were not spending additional money cooling it either.

Step 3 – consume less electricity

For the air conditioning, I remembered that the bathrooms were always quite cold in the summer, so we closed down the air vents a bit in those rooms.  We also revisited the cooling programs on our setback thermostats from our Voice of the Customer (VOC) work, and made some modifications once again to both the times the house would be cooled and the amount of difference in temperatures allowed when the house was unoccupied during the work/school week.  We also noted that the basement was always cool in the summer.  So we checked the air ducts for leaks and found a few of those that could be closed up.  This was something we had missed in the heating conservation efforts.  The knowledge here encouraged us to look elsewhere for leaks, and we found a few more in the ducts up in the attic as well.  We also instituted a policy to keep the basement door closed, so that the cold air in the house would not as quickly sink down to the basement. We were targeting at least 5% savings on the AC consumption, but realized about 7%.

We also took a hard look at our needs and realized we did not need the second refrigerator in the basement, which was also much older and less efficient.  We saved at least 5 kwh daily in the summer months and all year round by eliminating this refrigerator.

We found that the pond pump was in need of replacement, and we knew the original one was oversized for our pond, so we substituted one with 33% less electricity consumption.

Step 4 – go further with alternative energy

Although it is outside of the scope of this article, we investigated and ultimately installed a large 10kw solar energy array across 3 of our roofs.  This was a tremendous undertaking and it is not a simple matter.  However, the benefits were enormous, stretching our 25% reduction in electricity consumption through conservation priinciples to over 60% reduction in total electricity consumption ! There were greater savings too, as the unused portion of the electricity generated via the solar power was returned to the grid.  The unused solar power generates energy credits in New Jersey, called Solar Renewable Energy Credits or SRECs for short.  These SRECs can be sold on the open energy markets for hundreds of dollars each.  The SRECS we generate and sell pays for all our other utilities right now.  While the market for these will have fluctuations up and down, they are selling for a high price right now.

Summary

With some diligent efforts, we set out to save 10% on our home heating and electricity costs.  We saved over 15% in total energy consumption, through conservation efforts, consumption control and a little bit of personal behavior changes in the household.  We detailed our consumption of energy in each area, let nature help where possible, and reduced our consumption a fair amount. Our conservation efforts led us to explore alternative energy choices including wind, solar, geo-thermal and wood burning stoves.  By investing into alternative energy, specifically in a wood burning stove and a solar array, we live at our home in New Jersey with zero utility costs.  And New Jersey has some of the highest utility costs in the United States.  If we can do it, so can you!

For newcomers to the energy and utility savings efforts, this article should have helped get you started.  At the very least, I hope that I have gotten you motivated to look further into it based on my personal journey into conservation.  By saving on your utility costs, you not only put more money in your pocket, you do in fact help the planet and by extension your fellow man (or woman).  Over 50% of electricity in the USA is generated by burning coal, a fossil fuel and a limited resource.  Most homes in the USA are heated by burning oil or natural gas, both fossil fuels.  Remember that burning fossil fuels consumes oxygen, and we need that to breath!  Good luck on your journey into conservation and if you need help, please let me know.

If you want help, or have questions, then please visit us on the web at:

http://www.green-energyNJ.com

February 7, 2010

How You Can Turn Your Car Into a Gas Saving Machine With Hydrogen Kits Like Gas4free, Water4gas and Simplewaterfuel

Filed under: Cheaper Utility bills — Tags: , , , , , , , , , — admin @ 6:49 pm

In the movie Back to the Future, Michael J. Fox drives a car that can fly and travel in time. But probably the coolest thing about Marty McFly’s car of the future is that it also runs on garbage. Imagine just rummaging through your trash can to get everything that you need to fuel your car. For most Americans who are spending a fortune at the pump, this sounds too good to be true. While there isn’t any car yet that will run on trash, believe it or not, there is one that can use water to extract HHO, which is almost as easy to find as trash. In fact, water is one of the world’s cheapest and most widely-available resources.

Sound too good to be true? It’s not. And what’s even more amazing is that this car is the one you already own. That means no dealerships, no loan applications, just the car you’ve already got. All it’s missing is an HHO kit. An HHO kit is a powerful new technology that you can install onto your car to help it convert water into fuel. Imagine filling up your car out of the water hose instead of the $3.00-plus gas pump.

HHO kits install onto a car’s air intake. They are filled with ordinary water. The HHO kit converts the water into hydrogen. The hydrogen is then sucked into the car’s engine using the car’s available vacuum system. Once in the engine, the hydrogen mixes with the gasoline. This mixture causes many cars to double their miles per gallon rate. That means the gasoline goes twice as far as a car without the kit. That also means that your monthly gas bill might split in half. Imagine all of the amazing things that you could do with the extra money that you’ve been spending on gas – a nice vacation, a new high-definition television, bigger savings, or a new wardrobe. And all that was missing was an HHO kit.

HHO kits are extremely easy to install. Also, they make no major alterations to the car’s engine. This means that they can be easily removed when taking the car to a shop. Also, because they don’t alter the engine in any major way installing an HHO kit does not violate your warranty; still make sure of it!

Another great advantage to the HHO kit is that it is a snap to install. You don’t need to be a mechanic or super-handy to do it. You just need a free afternoon and the regular tools you probably already have laying around your house. Most car owners who’ve installed HHO kits have enjoyed the installation process as it makes a fun project. Installing an HHO kit is a great weekend activity for a father and son.

The easiest way to get your car start running on water is by ordering an HHO kit like gas4free, Water4gas and Simplewaterfuel . There are several websites online that sell really reliable and easy-to-install kits. Many of the kits are even extremely affordable. If you’re interested in installing an HHO kit on your car, you might want to check out water4gas, Simplewaterfuel or gas4free.

It’s not the future yet, and while your car will probably never fly, you can easily get it to start using HHO gas for fuel and start saving at the pump.

How to save on gas water4gas Gas Saver gas4free gas4free home page

January 9, 2010

Gas Suppliers – Saving Tips

Filed under: Cheaper Utility bills — Tags: , , — admin @ 1:51 pm

Natural gas has been the fuel of choice for the UKs energy requirements for over 27 years now; this is reflected in the fact that we are the world’s third largest consumer of natural gas.

With both usage and prices on the increase it’s vital that every homeowner is aware of steps they can take to make their homes’ as efficient as possible.

The most obvious way to save money on gas bills is to use less, what may not be as obvious though, is just how much you can save. Simply putting on a jumper and turning your thermostat down a few degrees could save you up to 10% on your bill!

As warm air naturally flows to cooler areas, it’s vital your house has adequate insulation. Places that require the most insulation are attics and areas above unheated rooms (e.g. garages, basement).

Drawing your curtains during the colder months and at night is a simple method to help keep a considerable amount of heat in.

As a great deal of heat is lost through windows and doors, double glazing is an excellent preventative measure to take. Although expensive to implement, they can make a considerable difference to the amount of heat you retain, and thus gas saved.

If you suspect your heating system may not be as efficient as it should then it’s advisable to get a CORGI registered engineer to come and check your gas suppliers central heating system.

All of the above will help make your home more “efficient”, you may however, still be paying through the teeth from your current gas suppliers. Moving to a new gas suppliers may therefore be an excellent way to ensure you are getting the best deal available.

Liam is a UK based writer.

January 2, 2010

Saving on Gas With the BP Visa

Filed under: Cheaper Utility bills — Tags: , — admin @ 6:35 am

Gas prices may be at an all time high here in the United States but that doesn’t mean we have to walk around with heads looking at the ground, this is no way to live our lives! Instead, we should be looking at other alternatives to find ways to save on gas. Besides working on our driving habits, there’s another thing on the market that can give back to you and it’s called a gas credit card.

A gas credit card such as the BP Visa is a great way to save on gasoline. For instance, for the first sixty days you can save ten percent on your fillips at any BP gas station. Some find that’s better than nothing but others seem that they can do better. In my opinion, I truly believe that this is one of the best cards on the market. You may start to think that just because this is an introductory rate that the rates after the card are going to be awful and that couldn’t be further from the truth. In fact, after the sixty days are up, you can save five percent! If you look at most cards on the market, some don’t even live up to this for their intro rate! What do you think about that?

Gas rebate cards can save a lot of people a lot of money and it’s important that you remember a few steps before you start swiping that card the gas pump. Credit card companies stay in business by charging you a huge interest rate on your unpaid bill. A credit card like BP I mentioned above has a fairly low industry standard rate of about ten percent. Remember, this rate changes constantly. If you don’t pay your bill off in full, that rate is going to be applied to your bill over the long run. This is why it’s important that you pay your bill off in full each month so that you don’t get tacked with that interest rate.

By now you’re probably wondering that ten percent for the card mentioned above isn’t even that much money but let’s put the math to work so that I can show you exactly how much you can save. Let’s make things easy and say that gas is four dollars a gallon and you fill up with ten gallons each week. Your total gas bill is going to be forty dollars. Let’s take that forty dollars and deduct the ten percent for the first sixty days. Sixty days equals about eight weeks. We’re now saving four dollars a week. Let’s take that four dollars we saved and multiply it by eight weeks. We now have a savings of thirty two dollars. Do you see how quick we can save on gas? It works wonders!

The BP card is just one of the hundreds of cards on the market. Look around online for gas cards and see which one fits your style. There are so many rewards and perks, there’s definitely a card out there for you regardless of your credit. Look around, find the card and start saving today!

Apply for the bp credit card and find more of Tom’s work at FINDgascards.

January 1, 2010

The First Step to Saving Money on Your Energy Bills: Part 1 (the Kitchen)

Filed under: Cheaper Utility bills — Tags: , , , , , , , — admin @ 11:17 am

Believe it or not, it is entirely possibly to start saving tonight on your energy bills – no matter where you live, or the type of house you live in. The real secret to saving money is knowing where to start. So, let’s get started!

 

It’s a very important step – yet it is one that nearly everyone falls all over. In fact, it is the first step for a reason. Knowing where to start looking for energy problems is half the battle. Once you find the problem areas of your home, you can find solutions that will fix or remedy those areas.

 

In this article, we’ll focus on your kitchen’s energy usage.

 

Every home or apartment has a kitchen. And in this kitchen there are numerous appliances you have to keep your eye on. Do you know what the biggest energy waster is in 95% of kitchens? It’s the refrigerator. That modern marvel is terrific for keeping foods from spoiling, but if it is more than 10 years old, it is “obsolete” and a waster of energy. Today’s refrigerator units use on average 25% less energy than their predecessors just 10 years ago.

 

So what can go wrong with a refrigerator? Usually the first sign of wear on an old fridge is the seals and hinges of the door. It isn’t surprising when you consider that the doors are opened and closed repeatedly at least 10 times a day in over 50% of homes. Think about how often you open and close the doors on a daily basis. Twice at breakfast, four times or more at dinner, and a few more times to reach for a cold beverage.

 

All the strain on the hinges adds up, especially on older units. Now granted, they are built to withstand the constant opening and closing, but eventually problems will crop up. And when they do, either the door refuses to close all the way or it gives way to small areas around the door that aren’t insulating as well as they should.

 

And the seal…well it doesn’t take long for the seal to crack or lose its tight “grip”. Once this happens, refrigerated air will leak out (or more to the point, warmer air will seep in) causing your fridge to work harder. The additional strain on the compressor, fan, and other parts means they run longer, on average, than usual. And this directly translates to high energy bills.

 

So, whats the solution? Well, hinges should be replaced if they are going bad, and the seals should be checked – especially on older units. You can also improve the efficiency of your fridge by ensuring it is not placed in direct sunlight or near a heat register. Minimize the amount of times the doors are opened and closed. Every time you open or close the door, you are exchanging cooled air for warm air. Finally, vacuum the exchanger coils once per year to allow better air circulation and more efficient operation.

 

The fridge is not the only place energy is used or potentially wasted. Your stove/oven also uses energy. And like refrigerators, the older they are the less efficient they become.

 

Whether you have an electric range or gas range, be aware that advances in appliance technology again means that units 10 years old or more are less efficient than current models. Keep in mind too if you have a natural gas range that there is inherent inefficiency with burning fuel for heat. Every gas appliance has an efficiency rating which tells you how efficient the unit is at converting the gas input to heat. As a practical example, if a range has a 10,000 BTU burner and operates at 80% efficiency, the most heat it will out put is 8,000 BTU. As the unit gets older, the efficiency rating goes down, so the fuel is burned less efficiently. This means that the range will need to run longer to achieve the desired result. Again, the direct result is higher gas bills.

 

Electric ranges are no different, except, as with all electronics, they are near 100% efficient in converting the “power”. In other words, there isn’t a built in efficiency problem as with natural gas appliances. The wattage the unit is rated at will be what it takes as input, and the heat output is consistent. There is no need to convert to an “efficiency output” as with natural gas. However, like their gas counterparts, the heating elements and electronics inside the unit certainly become outdated or can break over time. Consider that if an electric range burner “burns out” or breaks, it is useless. It must be replaced. Gas appliances usually don’t have these electrical problems. Newer units use less power and heat better because of better convective cooking surfaces, better heating elements, and better, more energy friendly electronics inside the unit.

 

Ovens, whether they are electric or gas, typically have the same faults. Over time, the seals wear out and heat is wasted through the doors, Their heating elements as well can become old and outdated. Additionally, the insulation that surrounds the oven may crumble or being to show signs of wear. All these elements contribute to the oven’s inefficiency.

 

So, how do you combat these problems? Sometimes, it isn’t an option to use them less. But ideally, that is the best course of action. When using the oven, try to cook foods during the last 5 minutes of the cooking cycle with the heat “off”. Avoid peeking into the oven – use the window. Opening the oven too often allows vital heat to escape, and thus the oven as to turn on for a period of time to compensate for the lost heat. You can use a similar trick with electric ranges. The element will remain warm for a couple minutes after it is turned off. Use covers when cooking on the range as they trap more heat than open pots and pans. Lastly, once boiling temperature is reached, turn down the burner to maintain the boil. It saves energy, while still boiling the liquid.

 

Last, let’s touch briefly on microwaves. Another modern marvel that makes cooking fast and simple. There is a direct correlation between the power of the microwave and the power consumption. The power, measured in watts, is the power input. At 100% power, the microwave converts most of the power input to radiation, which heats the food/liquid in the microwave. Simply put, the more powerful the microwave, the more energy it takes. There is no such thing as a powerful microwave that is “energy efficient”. Powerful microwaves are inherently energy hogs.

 

So, where’s the opportunity for savings here? Well, using the microwave in “short” periods helps. The less you use the unit, the better off you are. And like most other appliances, older units become inefficient over time. The electronics and more importantly the radiation (microwave) source becomes outdated and produces less radiation. The 10 year rule applies here – if it is older than 10 years old, look into replacing it. Also, watch the hinges and door latch. These have a tendency to come loose with constant usage, even if the unit is only a few years old!

 

I hope you’ve enjoyed the energy journey through the kitchen. Next article, We’ll walk through your living room and look for opportunities for energy savings there. See you then!

Energy Saver Dave regularly writes about home energy savings tips, energy efficiency, and saving money on home energy bills. He is not only an avid proponent of alternative energy and energy conservation, but of homeowner education about their home energy usage. He is a regular contributor to the Utility Bill Busters blog, a free resource for homeowners and renters to get valuable information on saving money on their energy bills. The blog is at http://www.utilitybillbusters.com.

December 29, 2009

Money Saving Advice – Sixteen Ways to Save Money on Your Gas and Electricity Bills

Filed under: Cheaper Utility bills — Tags: , , , , , , , — admin @ 5:13 am

We have just had the worst snow in twenty years last month which brought some parts of the UK to its knees. The Bank of England is trying to control deflation by reducing interest rate to one percent and still the prices for certain imported foods and energy costs are rising. Everybody is now feeling the fallout of the credit crunch and the recession is starting to take victims. Last month I noticed the biggest jump in my gas and electricity costs so I called my provider. They informed me that the costs were about right for the size of house although my gas was a bit high. My Gas and Electricity bill had jumped to £282 per month. (Ouch!)

Am I being mugged by my utility provider?

It certainly feels as if I am being mugged by my utility provider and the gas and electricity that is being supplied to my home is providing free gas and electricity to the rest of the homes on our development. At least Dick Turpin wore a mask when he was robbing the public. So faced with increasing utility costs I put on my money saving expert hat and started to investigate how I could reduce my gas and electricity costs.

Government Grants website

You could use the Government Grants website which provides a source of information for UK grants for gas central heating, loft insulation and cavity wall insulation. Government grants from 40% to 70% are available to homeowners and tenants for loft and cavity wall insulation. These grants are funded by the utility companies and are non-refundable. These grants will not be around forever and once the funding that has been allocated is exhausted they will finish. They also offer a solar heating grant of £400 towards the cost of installation of solar panels which cost around £4,000 depending on the size of your home. If you do not meet their eligibility criteria for free insulation, then grants from around 50% are available for loft insulation and cavity wall insulation, so you can still achieve a massive saving on the normal cost.

The Governments’ Energy Saving Trust Website

I also discovered that there were grants available to help us implement energy saving measures and help reduce our carbon foot print. The Governments’ Energy Saving Trust website provides grants and they have a wonderful search tool to help you find grants or offers that are available for you in your area. All you need do is complete the questions asked on their search for grants and offers page. You will then be presented with a list of providers offering discounted prices or grants in your area. This is a brilliant site and is packed with great advice and help for saving energy, saving money and reducing your carbon dioxide emissions from your home.

What Savings can I expect from loft and cavity wall insulation

Our homes lose 35% of their heating through the walls and 25% through the roof. At the Governments Energy Saving Trust website they have an Energy Saving House where they show you a full range of energy saving measures. For example by insulating the loft and having cavity wall insulation with a grant you could reduce you’re heating bills by around £365 a year and reduce your home’s carbon dioxide emissions by up to 1.5 tonnes.

You can complete their online Energy Savers report which allows you to understand your homes energy efficiency performance to reduce your energy use and how to save money. The average cost seems to be between £225 to £249 for either cavity wall insulation or loft insulation depending on the size of your home. Although I did find that B&Q the DIY store was charging £199 for either cavity wall insulation or loft insulation depending on the size of your home. If you are over 70 years old you can receive loft insulation and cavity wall insulation for free from the Energy Saving Trust or the Government Grants website.

Old central heating boilers are inefficient

Changing you’re a central heating boiler that is over ten years old will reduce your gas bill as it is thought that these older central heating unit are only 70% efficient. This means that for every £1 of gas that you buy your old unit wastes 30pence of the money you pay for your gas. Add some heating controls taps to your central heating radiators and they could help save you a further 17% of your heating bill when fitted with a condensing boiler along with an upgraded heating control and you could be looking at a total saving of as much as 40% of your heating bill providing a saving of £275 a year depending on the size of your home.

Sixteen ways to save money on your monthly utility bill

To summarize here is a list solutions and other money saving tips that are available to help you reduce your gas and electricity bill. The grants and discounts available will vary according to the size of your home, your location, your annual income and your age.

1. Grants for gas central heating depends on age and benefits being claimed
2. Grants and discounts for loft insulation from £199
3. Grants and discounts for cavity wall insulation from £199
4. Grant of £400 towards the installation of Solar panels
5. Replace existing light bulbs with Energy Saving Lightbulbs, they cost around £2 per bulb and you could expect to save around £45 before it needs replacing. These bulbs use 80% less electricity and will last ten times longer than a standard light bulb. Count the number of bulbs you need and see the savings.
6. Update your Central heating unit if older then 10 years. Consider either a condensing boiler along with an upgraded heating control unit or replace it with a Combi Boiler as this will do away with a conventional hot-water storage cylinder and water tanks in the loft. Costs from £2,000
7. Add heating controls tap to all your radiators, they cost from £7.99 each
8. Switch Utility providers for a better deal.
9. Switch your gas and electricity providers to a duel fuel provider if you have not already done this for further savings, save around £115
10. Pay your utility bills monthly by direct debit for a further discount from your provider.
11. Switch to an online account with your utility provider. You can now read your gas and electricity meters monthly and update the information for an accurate bill. This will prevent over billing from estimated assessments of your usage.
12. If you are on a coin operated meter for your gas and electricity then consider switching as you are paying a premium for this facility.
13. Switch off all light switches and plugs when the appliances are not in use.
14. An estimated £910 million is wasted in the UK every year by people leaving televisions, computers, TV set-top boxes and radios on standby.
15. Use a timer to turn your central heating on and off as required.
16. Consider switching to Energy Saving Recommended household appliances as they could cut your energy consumption by up to a third compared to your old appliance. Obviously only do this as you replace broken or old appliances.

For further ways of reducing your gas and utility bill then you should visit the Energy Saving Trust website where you will find a mountain of further money saving ideas and help.

Anyone can reduce their Gas and Electricity bills

Anyone can reduce their Gas and Electricity bills by at least 20% following the sixteen ways to save money listed above. Unfortunately, like most things you need to spend some money to save money; but the rewards will return each month. By implementing a few of these money saving tips at home you will certain reduce your gas and electricity bills in the future and save money. You’re thinking I cannot afford to make all these changes. Start with the changes that cost the least and then work your way through the list above. Remember by making these changes you will not only save money each month but you will be helping our planet HOME by reducing your carbon dioxide emissions.

Contributing author Mark Aucamp has been providing Talk Money Blog with regular Money Saving Advice advice and comments. Mark has extensive experience in providing Debt Management, Quick Mortgage Advice and solutions. He is recognised as an authority in the field of debt management and mortgage advice. Find out how to clear your credit card debts legally!

“saving on Electric Bills” System © – You’ll be Surprised!

Filed under: Changing energy supplier — Tags: , , , , , — admin @ 4:32 am

By using “Saving On Electric Bills” System you get an amazing opportunity to produce your own independent power-supply in just matter of days. Amazingly or not, this technique can be implemented quite easily by any novice user. Need more information? start reading this article and hear more about this special technology.

Short background

To make a long story short – “Saving On Electric Bills” System is based on several ‘proven’ downloadable guides that reveal the ‘secrets’ of creating Solar-Cells step-by-step. Just like everything else in life, some guides deliver and some other don’t; verify that it provides the following: clear illustrations, photos, diagrams, videos, and technical support. In any case, here are few key-benefits and & quick advices that can help you out.

Important advantages

Undoubtedly most of us can find this solution highly effective:

* Extremely easy to be implemented by almost anyone.
* Helps the environment.
* Made of simple parts/tools found at any local hardware store.
* Helps on reducing the amounts of carbon dioxide in the air.
* Saves hundreds month-after-month.

Tip to go

For maximum efficiency – once in a while make sure to keep your paneling clean of dust and other dirt.

Conclusions

Thanks to this unique “Saving On Electric Bills” System any household finally gets the opportunity to significantly ‘cut’ on their elect. expenses by almost 80%. We could probably indicate many other great benefits provided by this remarkable invention, simply because it is about to change the entire industry forever. By the end of this quick article the best advice would be to test it so you could truly see how it can save your monthly budget.

Learn how “Saving On Electric Bills” System easily enables you to produce free and unlimited electricity in just few days.


Visit: EasyFreeEnergy.com

December 18, 2009

“saving on Electric Bill” System © – Try it Right Now!

Filed under: Changing energy supplier — Tags: , , , , — admin @ 3:57 am

Why is it considered by many household owners as revolutionary? Simply because “Saving On Electric Bill” System enables us for the first time to say goodbye to these irritating and expensive electricity-bills. Very quickly you’ll find out that this technique makes it possible for almost anyone – novice/professional to get it to work in just a few days. Read this short report if you want to find out more why any of us should use it a.s.a.p.

Getting some basics

If you want to have such “Saving On Electric Bill” System all you need to do is following one of these ‘secret’ guides available on the Web that can teach you how to professionally assemble Solar-Panels. Just like everything else in life, some guides deliver and some other don’t; verify that it provides the following: clear illustrations, photos, diagrams, videos, and technical support. This way or another, here are some key-advantages and tips that can help you to know a little more about this topic.

Main benefits

The solution described in this report quickly provides the following:

* Leaves us almost unaffected by any possible energy crisis.
* No need to remember to switch off the lights each time we leave the room.
* It is portable and you can take it with you (camping for example).
* Cuts down on the usage of non-renewable enr. resources.
* Requires no more than a weekend to be installed.

Tip to go

If you want to get the most out of your unit – maintain the paneling clean of dirt and dust.

On the bottom line

If we look for an outstanding opportunity that’ll help us erase our elec. expenses, no doubt that this advanced “Saving On Electric Bill” System can get us there. If we go a little further, it wouldn’t be that hard to discover other great benefits provided by this special ‘machine’, simply because it offers so many important opportunities. The best advice would be to test it so you could explore the various advantages that it provides.

Learn how “Saving On Electric Bill” System easily enables you to produce free and unlimited electricity in just few days.


Visit: EasyFreeEnergy.com

Older Posts »

Sunshinebob · SEE OUT OTHER SITES HERE:- ED Advice · mChip · Gastric Band · Lap Bands · NADH · NADH Pills · Type 2 Diabetes Cure · Lose Your Fat · School Health · Asthma · Diet & Exercise · Get Fit & Healthy · Healthy Hearts · In The Best of Health · Mens Health Online · Nutrition Guides · The Health Blog · Health Blog · The Best of Health · Asthma Info Blog · Stop Smoking Advice · Healthy Eater · Digestive Endoscopy · Live to 120 ·